Coder accessories
Measuring wheelsConnected to coders, these easily accommodate a movement in materials, speed of movement, etc.
Smooth synthetic, striated synthetic or striated metallic coating.
Development of 20 cm/turn or 50 cm/turn.
Mounting bracket Z 119.017For standard flange coders.
Supplied with 3 no. M3 x 12 screws and 3 lock washers to fix Ø 58 coders with a centring shoulder of Ø 36 mm.
Mounting base Z 119.015For synchro flange coders.
The coder is fitted onto the base using 3 screws and 3 eccentrics which are ordered separately using reference Z 119.018.
Eccentrics Z 119006For synchro flange coders.
3 eccentrics are needed to fit the coder.
Ref. IVO | type of | width | weight | bore |
Coating | ||||
Development 20 cm | ||||
MR291.07D | Striated synthetic | 12 mm | 135 g | 7 mm |
MR291.10D | Striated synthetic | 12 mm | 135 g | 10 mm |
MR241.07D | Smooth synthetic | 12 mm | 135 g | 7 mm |
MR241.10D | Smooth synthetic | 12 mm | 135 g | 10 mm |
MR211.07A | Striated metallic | 12 mm | 50 g | 7 mm |
MR211.10A | Striated metallic | 12 mm | 50 g | 10 mm |
Development 50 cm | ||||
MR592.07D | Striated synthetic | 25mm | 260 g | 7 mm |
MR592.10D | Striated synthetic | 25mm | 260 g | 10 mm |
MR542.07D | Smooth synthetic | 25mm | 260 g | 7 mm |
MR542.10D | Smooth synthetic | 25mm | 260 g | 10 mm |
MR512.07A | Striated metallic | 25mm | 340 g | 7 mm |
MR512.10A | Striated metallic | 25mm | 340 g | 10 mm |
Push pull interface with inverted signals
Short circuit protection
Age and temperature compensation

Самовывоз со склада г. Екатеринбурга |
Бесплатно |
ТК Деловые Линии |
от 500 руб |
Курьером EMS до адреса | от 700 руб |
Отправка Почтой России не производится.