G9SB-301-D AC/DC24, Omron Dual-Channel Emergency Stop Safety Relay, 24V ac/dc, 3 Safety Contacts, Реле безопасности

G9SB, Safety Relays, Ultra Slim

The Omron G9SB series is an ultra slim safety relay available in either a 17.5mm or 22.5mm housing. The 17.5mm units have 2 or 3 safety contacts and the 22.5mm units have 3 safety contacts and an auxiliary contact.

1 and 2 input channel units
Manual and automatic reset units
Certification up to category 4 according to EN954-1 (depending on the application)
Can also be used with safety sensors F3SN, F3SH, F3S-B, F3STGR, F3SL, F3S-J
Conforms to EN standards (TUV approval)

Note

When ordering take note of the safety reset mode that is required: Models G9SB**A and G9SB ** B = Auto Reset operation; Models G9SB ** D = Manual Reset operation

Approvals

EN954-1, EN60204-1, UL508, CSA C22.2 No. 14

G9SB Ultra Slim Safety Relays.

•Ultra slim relay module.
•Models with a width of 17.5 mm are available with 2 or 3 poles (safety contacts).
•Models with a width of 22.5 mm with 3 poles (safety contacts).
•1 and 2 input channels.
•Manual and automatic reset.
•Can be DIN rail mounted.
•Relays with inverse inputs are used when inputting signals from 2 mechanical switches.
•Relays with positive commons are used when inputting signals from a safety sensor or one mechanical switch.
•Conform to EN standards (TUV approval).
•G9SB-3010 is applied to safety category 3 of EN 954-1 if double breaking is used.

Applicable to Safety Sensors.

•Model F3S-B
•Model F3SH
•Model F3S-J
•Model F3SL
•Model F3SN
•Model F3S-TGR
Model F3S-TGR Safety Sensors covers a range of articles available within Non-Contact Safety Switches, Light Curtains, Light Beams and Machine Guarding Accessories.

G9SB-301-D ACDC24 Slim Safety Relay.

•Main contact 3PST-NO (normally open).
•Auxiliary contact SPST-NC (normally closed).
•1 or 2 Channels.
•Manual reset.
•Input type +common.
•Rated voltage 24 V ac/dc.
•Operating voltage range 85% to 110% of the rated power supply voltage.
•Power consumption 2 VA/1.7 W max.
•Input current 30 mA max.
•Resistive load
•Rated load 250 V ac, 5 A. 30 V dc, 5 A.
•Rated carry current 5 A.

Features and Benefits.

•Contact resistance 100 mΩ
•Insulation resistance 100 MΩ mon (at 500 V dc)
•Vibration resistance 10 to 55 to 10 Hz, 0.375 mm single amplitude (0.75 mm double amplitude)
•Shock resistance destruction 300 m/s².
•Shock resistance malfunction 100 m/s²
•Failure rate (P Level) (reference value) 5 V dc, 1 mA
•Always turn OFF the G9SB before connecting an expansion unit.
•If mounting multiple units next to each other the rated current will be 3 A. (do not apply any higher currents)
•Stranded wire 0.2 to 2.5 mm²
•Solid Wire 0.2 to 2.5 mm²
•Screw torque of 0.5 to 0.6 Nm. (incorrect screw tightening can result in a malfunction or generate heat).
•Positive thermistor built onto the circuits detecting short breakdowns.
•Weight 120 g

Applications Include.

•Light curtain.
•Light guard.

Machine Guarding and Safety Range Overview

Omron Machine Safety

G9SB Datasheet