SKF 6002-2RSLTN9/C3VT162 Single Row Deep Groove Ball Bearing- Both Sides Sealed 15mm I.D, 32mm O.D, Шарикоподшипник

SKF High Temperature Deep Groove Ball Bearing

SKF Ball Bearings are designed to deliver increased reliability, reduced complexity and decreased environmental impact in high operating temperatures.

Features:

• Excellent performance in hot conditions, dry environments and low rotational speed applications
• Temperature range -30°C to 150°C
• Suitable for high and very high speeds
• Steel/Ceramic ball material
• Plain race type
• Low friction
• Available in many designs, variants and sizes

Why choose Deep Groove Ball Bearings?

• For their versatility - channelling radial and axial loads they are widely used in many industries
• Cost efficient - due to low friction torque the temperature remains low therefore reduces the energy cost of running in equipment such as the conveyor belt
• Low maintenance - no additional lubrication after installation

Applications:

• Agricultural industry
• Food processing
• Machine Tools
• Material handling
• Medical/Pharmaceutical
• Printing
• Wind energy

What is the inner ring diameter?
A range between 6 mm to 40 mm

What is internal/external design?

• 2RS1 - Contact seal NBR on both sides 2RSH - Contact seal NBR on both sides
• Z, 2Z - Shield on one or both sides
• 2RSL - RSL low-friction contact seal on both sides of the bearing
• 2RZ - RZ low-friction non-contact seal on both sides of the bearing
• 2ZNR - Shield on both sides, snap ring groove in the outer ring, with snap ring
• NR - Snap ring groove in the outer ring, with an appropriate snap ring
• E - Reinforced ball set

Cage Design

• TN9 - Glass fibre reinforced polyamide 66 cages, rolling element centred
• Stainless steel

Lubrication

• GJN - Grease with a polyurea thickener of consistency 2 to the NLGI scale for a temperature range -30°C to +150°C (normal fill grade) VT162 - Lubricated with Klueber Isoflex Topas NB52 grease
• WT - Grease with a polyurea thickener of consistency 2 to 3 to the NLGI Scale for a temperature range –40°C to +160 °C
• LHT - Grease with a lithium thickener of consistency 2 to 3 to the NLGI Scale for a temperature range –50°C to +140 °C
• HT - Grease with a polyurea thickener of consistency 2 to 3 to the NLGI Scale for a temperature range –40°C to +150 °C (normal fill grade)

Accuracy/Clearance

• C2 - Radial internal clearance smaller than normal C3 - Internal clearance greater than normal
• C4 - Radial internal clearance greater than C3
• C5 - Radial internal clearance greater than C4

SKF Ball Bearing, Deep-Groove Bearing Type, Sealed, 15mm ID, 32mm OD - 6002-2RSLTN9/C3VT162

Need a ball bearing you can rely on in extreme industrial environments? This deep-groove ball bearing from SKF has an operating temperature range of -30°C to +150°C, with a nitrile rubber seal on both sides to prevent the lubricant from drying out. The sealed ends keep the balls and race safe from contamination, making this a suitable choice for dusty and dirty environments and meaning there's no need to relubricate.

Features & Benefits

• Fibreglass-reinforced nylon cage combines, elasticity, light weight and low friction to support high acceleration and minimise vibration
• Parallel bore means you can fit it easily onto a shaft without the need for a bearing sleeve
• Steel construction combines strength with corrosion resistance

Applications

• Agricultural equipment
• Machine tools
• Pharmaceutical production

Why choose a deep-groove ball bearing?

Deep-groove ball bearings are the most widely used type of ball bearing thanks to their versatility and efficiency. They can support a limited axial load along with a high radial load. They also operate at lower temperatures than other types of bearing, which extends their service life. Their quiet operation ensures a safe and comfortable workplace.

Deep Groove Ball Bearings

Datasheet

SKF Bearing Designations

Datasheet - 6002-2RSLTN9/C3VT162

Catalogue - Rolling Bearings

Catalogue - SKF Coatings

Brochure - Stainless Steel Deep Groove Ball Bearings

Instruction Sheet - SKF TMMK