64265, 3M Cubitron™ II Ceramic Sanding Disc, 150mm, P180 Grit, 775L, 50 in pack, Наждачный круг

3M Ceramic Sanding Disc, P180 Grit, 150mm Diameter - Cubitron II Series - 64265

To speed up sanding tasks without compromising on the quality of the finish, use this disc from 3M. It's made with triangular-shaped ceramic grains to maximise abrasiveness. This gives you a clean and consistent cut even as the disc wears down, reducing the effort needed. A grade of P180 means the grit is fine enough for using in-between coats of paint or for finishing jobs. Made with an open coat, it's suitable for use on soft metals, composite materials and white woods.

• Hook and loop backing for easy attachment and removal
• Multi-hole design for efficient dust extraction and reduced clogging
• Holes don't need aligning with disc pad holes, to make fitting quick
• Maximum safe speed of 10,000rpm means it's suitable for professional and DIY tools

Applications

• Marine industry
• Building and construction
• Metalwork and fabrication
• Automotive workshops

Using the 3M™ 775L outperforms conventional ceramic discs. Designed to be used with a 3M™ Hookit™ backing pad with an angle grinder or sander. This film wheel is well-suited to stock removal and is effective on a wide variety of materials, including metals, composites, gel coats and white woods.

What power tools does this abrasive disc work with?

This abrasive disc works with orbital sanders that have a disc pad size of 150mm. It also works with sanding and grinding tools fitted with a 3M Xtract backup pad.

Optimised Cutting

Using 3M™ precision-shaped grain technology to offer a higher initial and durability to outlast conventional ceramic fibre discs. The grit wears evenly and with the abrasive staying cooler and sharper, the PSG abrasive lasts significantly longer than conventional ceramic discs. These discs will help to step up production with an improved output on both light and heavy stock removal.

Quick Change system

The Hookit™ system from 3M™ provides a secure attachment with a hook and loop system. It allows for these Hookit™ discs to be quickly swapped out in seconds. The Hookit™ disc pad (150 mm backing pad - 456-2439) is sold seperately.

Features and Benefits

3M Precision Shaped Grain yields higher cut rates and excels at heavyweight applications
Film backing provides a greater tear resistance and edge retention
Reduce costs with long-lasting abrasive - completes more parts than conventional discs
Ideal for a wide variety of materials and applications
3M™ Hook and loop attachment system keeps the disc secured into place when bought with the 3M™ Hookit™ 150 mm backing pad - 456-2439.

Typical Applications

The 3M™ 775L film discs are great for surface removal on a variety of materials from metals, composites, gel coats and white woods. This could occur in industries such as farm and construction, automotive, ship and boat building, metal fabrication.

FAQ's

Q. How to change this sanding disc?

A. With a hook and loop backing, it works great with 3M™ Hookit™ backing pad. The pad allows for added pressure on stubborn removals.

Q. How long does this disc last?

A. The 3M™ 775L has Cubitron II™ abrasive blend that not only cuts twice as fast but lasts 6 times as long as conventional abrasive discs.

Datasheet

Brochure - Abrasive Safety Short Form Guide