89720, 3M 782C Ceramic Sanding Disc, 180mm, Medium Grade, P60 Grit, 25 in pack, Наждачный круг

3M Ceramic Sanding Disc, P60 Grit, 180mm Diameter - 782C Series - 89720

Make finishing metalwork easier with this sanding disc from 3M. It uses hard ceramic minerals for quick and effective sanding. These grains are precisely formed with sharp peaks to reduce the effort needed to cut through strong materials. As a closed-coat abrasive, it's suitable for use on carbon and stainless steel as well as aluminium. The medium-grade disc has a coarse grit size of P60 for swift weld removal, deburring and edge chamfering tasks.

• Made with a stiff fibre backing and resin bonding to reduce tears and maximise durability
• Punched with a centre hole, ready to fit on the face plates and hubs of angle grinders
• Prism-shaped grains wear down evenly for consistent sanding and cooler grinding temperatures

Applications

• Metal fabrication
• Automotive industry
• Building and construction
• Shipbuilding and repair

Using the 3M™ 782C outperforms conventional ceramic discs. Designed to be used with a 3M™ backing pad with an angle grinder or sander. This fibre wheel is well-suited for edge chamfering bevelling, deburring and weld removal on mostly carbon steel.

How do I remove sanding marks or lines made by abrasive discs?

Coarse-grade and medium-grade discs work well for surface preparation tasks but can leave marks. To get the best results, work in the direction of the grains and use a fine-grade grit afterwards for a defect-free, smooth finish.

Optimised Cutting

Using 3M™ precision-shaped grain technology to offer a higher initial and durability to outlast conventional ceramic fibre discs. The grit wears evenly and with the abrasive staying cooler and sharper, the PSG abrasive lasts significantly longer than conventional ceramic discs. These discs will help to step up production with an improved output on both light and heavy stock removal.

Features and Benefits

• Cuts hard and fast to grind metals like stainless steel and high nickel alloys
• 3M Precision Shaped Grain yields higher cut rates and excels at heavyweight applications
• Grinding aid minimises grinding temperatures for heat-sensitive alloys
• Reduce costs with long-lasting abrasive - completes more parts than conventional discs
• Durable and tear resistant

Typical Applications

The 3M™ 782C heavy-duty fibre discs are great for weld removals, grinding and blending large and small metal areas. This could occur in industries such as farm and construction, automotive, ship and boat building, metal fabrication.

FAQ's

How do I know which fibre disc to use on what substrate?

The 782C disc is for use on carbon steel, the 787C is used for stainless steel and other non-ferrous alloys such as aluminium and titanium (Sold at RS).

Would you be able to use these discs on wood?

These abrasive discs are designed for use on metals, and are not recommended to be used on wood.

What safety requirements should I observe?

When grinding metal or sanding, appropriate personal protection equipment should be worn. Gloves, eye protection and even respiratory protection are essential PPE for general purpose grinding and polishing applications.

For safe operation of an angle grinder, be sure you have participated in appropriate training and are aware of all safety advice relevant to the material you are working on.

Why choose 3M?

3M is a leading innovator of abrasive technologies, constantly evolving to provide ideal solutions to industrial and commercial applications. With 3M you can be assured of a wide selection of quality products.

Datasheet

Datasheet - 782C Fibre Disc