30288-AB Flaw Detection System, 30288-AB | Ambersil Leak & Flaw Detector Spray, Cleaner, 400ml, Aerosol

Ambersil Flaw And Leak Spray
The Ambersil 400ml flaw and leak spray is a quick-drying solvent cleaner/degreaser and an excess penetrant remover for the non-destructive testing of metal surfaces for liquid penetrant inspection. The engineering materials can have several deep cracks despite the small opening width on the surface. This can cause serious defects. Such cracks may be difficult to detect by normal visual inspection. However, penetrant flaw detection is an extension of the visual inspection method that highlights these invisible defects. It is a fast-drying, powerful degreasing solvent blend free of 1,1,1-trichloroethane or other chlorinated solvents for the removal of dirt, grime, and contaminants. It is formulated for the pre-treatment of the surface, before the liquid penetrant inspection and to remove all visible, coloured traces of the penetrant. Part 1 - CleanerA powerful solvent cleaner to flush oil, swarf or soiling that may be obscuring the defect.Its important features are:Powerful flush actionFast evaporationLow odour, safe to use, non-chlorinatedPart 2 - PenetrantA highly visible low surface tension dye that will quickly find its way into the smallest crack or flaw. Its important features are:Can also be applied to the underside of components or structuresEasily removed by the solvent cleanerPart 3 - DeveloperA white chalk contrast medium that offers maximum visibility against the red penetrant fluid.Its important features are:Dries quickly to form a white powder coatingDoes not run-offEasily removed after inspectionAllows the effective 'bleed-through' of the penetrating dye
Features and Benefits
Effective wash-away of contaminants and coloured penetrantFast evaporation to minimize downtimeLeaves no residueQuickly dissolves grease, oil, lubricants, tar and adhesivesSafe on most plastics, coatings, and rubbers (test prior to use)Stable, non-staining, and non-corrosive
Certifications
ANSI/ESD S20.20:2014BS EN 61340-5-1:2007