3208943, Phoenix Contact PT 4-FSI/F Series Black Fused DIN Rail Terminal, 4mm², Single-Level, Push In Termination, Fused, CSA

PT Type F Fused DIN rail terminal block - Phoenix Contact

The PT DIN rail mounted terminal blocks from Phoenix contact are fused, type F terminal blocks that give you the added protection compared to a conventional DIN rail terminal block. PT series blocks are small in size, so it allows for wiring in confined spaces while also allowing a more compact setup on a single rail. These terminal blocks have a double function shaft while also having an additional testing port and thanks to the push-in connection technology, you'll have an effortless install. Simply plug in your cable and ensure a tight connection has been made by slightly tugging the cable.

The housing is made from a black polyamide material and is backed by a flammability rating of V0. Not to mention, these PT terminal blocks also have an LED to allow you to determine your voltage rating.

Features and benefits:

• Added protection with an F type fuse


• Small size allows for even the tightest of installs


• LED to indicate voltage


• 50% less insertion force thanks to Phoenix's initiative push-in connection technology

Complete Line:

The PT series is apart of Phoenix Contacts vast and comprehensive portfolio. Complete line is a solution from Phoenix Contact that gives you a full range of products that all go hand-in-hand to make a perfect control cabinet. It covers all bases from connections, switching and measuring all the way to controlling, supplying and automation. Choosing complete line products makes it far more efficient to get a cabinet working.

Phoenix Contact Fused DIN Rail Terminal Block, 400V, 10A - PT 4-FSI/F - 3208943

Use this fused terminal block from Phoenix Contact to set up your electrical circuitry and equipment. It has a type F fuse to offer you an additional layer of protection from power surges or over-voltage.
The block is suitable for DIN rail mounting, so it's compatible with industry-standard fittings. It also allows simple push-in connections, meaning you can install it on your PCB (printed circuit board) quickly and easily. The LED (light-emitting diode) indicator lets you determine the voltage rating at a glance, making for convenient operation.
As this terminal block comes complete with a testing point, you can be sure of safe operation. Its black PA (polyamide) housing gives it a good level of impact strength and durability for reliable performance and a long product life.

• Black in colour
• Current rating of 10A
• Two connectors
• Single level
• Pitch of 6.2mm
• NS35 rail type compatibility
• Voltage rating of 400V
• Wire size range of 24 to 10AWG (American Wire Gauge)
• UL (Underwriter Laboratories) 94-V0 rating means it will burn for no more than 10 seconds when exposed to a naked flame
• RoHS (Restriction of Hazardous Substances) certification indicates it contains no more than trace amounts of harmful materials

Push-In Connection Terminal Blocks

The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm² and up.

PT 4-FSI/F Data Sheet

Datasheet

EU Declaration Of Conformity - 7081615

Installation Instructions

Brochure - Terminal block system