Teledyne LeCroy PPE6KV Oscilloscope Probe, Probe Type: High Voltage, Passive 400MHz 1:1000, Щупы для осциллографа

Teledyne LeCroy Oscilloscope Probes

The Teledyne LeCroy oscilloscope probe is suitable for a wide range of applications where high voltage measurements have to be made safely and accurately. There are three fixed-attenuation probes, covering a range between 4kV and 6kV. It has a new technology which utilizes hybrid circuitry minimizes ringing and overshoot to provide a precise response.
Note:
Probe Ring: PPE1.2KV = No
PPE20KV, PPE2KV, PPE4KV, PPE5KV, PPE6KV = Yes
Cable Length: PPE20KV = 3m
PPE1.2KV, PPE2KV, PPE4KV, PPE5KV, PPE6KV = 2m
PPE20KV peak voltage = 40kV
Supplied with:
Trimming tool
Sprung hook
IC insulating tip (red)
Insulating tip (red), ground lead (22cm)
BNC adaptor
Straight tip (0.8mm)
Spring contact tip (0.8mm)
Crocodile clip
Flexible 4mm security adaptor
Security ground lead

Features and Benefits

Bandwidth is DC to 400MHz (–3dB)
Attenuation ratio is 1000:1
Input impedance is 50Mohm ll<6pF each side to ground
Maximum non-destructive input voltage is 6KV
All PPE series probes automatically re-scale any supported Teledyne LeCroy oscilloscope for the appropriate attenuation factor of the probe

Certifications

CAT I

PPE 6 kV Instruction Manual