RS PRO LED Emergency Lighting, Twin Spot, 2 x 7.5 W, Non Maintained

RS PRO LED Emergency Lighting, Twin-Spot Non-maintained, IP65

RS PRO is proud to offer this superb IP65 LED non-maintained twin-spot luminaire that features a lightweight polycarbonate body with twin-spots LED lamps. This LED emergency light unit is the ideal energy-saving and cost-effective solution to fulfil emergency lighting requirements. Commonly found in spaces requiring an emergency lighting supply such as industrial units and warehouses.

Why would you choose this emergency lighting?

This emergency light source has been well-thought-out and has key features such as automatic self-test, tilt and pan heads for directional lighting. Also included are LED indicators with an in-built sounder, neutral white led light output with 3hr emergency duration.

Features and Benefits

• Twin Spot


• Lamps ok status and Charge indicators


• 3-hour non-maintained operation on battery power


• Tilt and pan


• IP65 rated - protected against dust that may harm equipment, and protected against water spray

Specification

• Lamp Type: LED


• Luminosity: 470lm


• Colour Temperature: 3500K


• Maintained: Non-Maintained


• Material: Polycarbonate Finish White


• Duration: 3h minimum


• Lamp Supplied: Yes


• Lightweight - 2.8Kg

The RS PRO Emergency Lighting Twin Spot also features an automatic self-test, LED indicators, and a built-in sounder.

Dimensions

• Length: 296 x Width: 272 x Depth: 75 mm

Electrical Specification

• Wattage: 2 x 7.5 W LED


• Battery: 9.6V 6Ah NiCd

Applications

• LED emergency exit signs


• Commercial, Industrial and Retail


• Corridors, Workshops, Emergency exits

Why RS PRO?

RS PRO is the own brand of RS. The RS PRO Seal of Approval is your assurance of professional quality, a guarantee that every part is rigorously tested, inspected, and audited against demanding standards. Making RS PRO the Smart Choice for our customers.

Approvals

RoHS

Standards

EN 60598-1: 2008+A11: 2009, EN 60598-2-22: 1998+A1: 2003+A2: 2008, EN 55015: 2013 , EN 61000-3-2: 2006+A2: 2009 , EN 61000-3-3: 2013, EN 61547: 2009

Emergency Light Fittings

There are two basic types of emergency lighting luminaires - maintained and non-maintained.
Maintained, these luminaires have the advantage of being able to be switched between the maintained function (lamp illuminated at all times) and non-maintained (lamp off until power supply fails), making them ideal for applications such as corridors, workshops and permanently illuminated emergency exit signs. The maintained luminaires also have the facility of being switched in banks of up to ten units.

Non-maintained, these luminaires are only illuminated on a failure of the mains supply. Ideal for emergency exits, switchrooms and storage areas.

Contains SVHC - Cadmium - CAS No. 7440-43-9

RS PRO Datasheet

Restricted to Professional Users Only

Permitted use of Nickel Cadmium (Ni-Cd) Batteries