Teledyne LeCroy PP006C Oscilloscope Probe, Probe Type: Passive 500MHz 1:10, Щупы для осциллографа

Teledyne LeCroy Passive Probe PP006C

Passive probes are the standard probe provided with most oscilloscopes. They are also sold as separate items and as replacements. The PP006C has 500 MHz bandwidth, 12 pF input capacitance and 5 mm probe tip diameter. It is typical of passive probes in that it provides a 10:1 attenuation and features a high resistance of 10 MΩ. Its high input resistance makes the passive probe a choice instrument for low frequency signals, because circuit loading at such frequencies is minimised. Passive probes are designed to handle voltages of at least 400 V. The PP006C handles up to 500 V. Teledyne LeCroy passive probes feature an attenuation sense pin which activates the oscilloscope to scale waveforms automatically, with no operator input.

Note

The PP006C passive probe is compatible with Teledyne LeCroy WaveJet Touch oscilloscopes. Using the appropriate passive probe with an oscilloscope means the probe will be properly compensated across the entire bandwidth. Otherwise compensation will be for low frequencies only.

Supplied with

Sprung hook, ground lead 11 cm, ground lead on probe tip, IC insulating tip, colour bands (yellow, red, blue, green - 2 off each), trimmer tool

Passive Oscilloscope Probes

Note

All the products in this range are supplied for use with instruments with a permanent earth connection.

Operators Manual